![background image](http://html.mh-extra.com/html/kramer/vs-3232dn/vs-3232dn_user-manual_2001320016.webp)
VS-3232DN – Overview
9
#
Feature
Function
1
Double-
function
Selector
Buttons
Area
Menu
Button
Functions
ESC
Press to exit the current operation
2
EDID
Press to assign EDID channels
3
STO
Press to store the current setup in a preset. After pressing the
MENU button, this button lights and is enabled.
4
ALL
Press to connect an input to all outputs. After pressing the
MENU button, this button lights and is enabled.
5
OFF
Press to turn off an output. After pressing the MENU button, this
button lights and is enabled.
6
RCL
Press to recall a preset. After pressing the MENU button, this
button lights and is enabled.
7
DELAY
Press to set the delay between confirming an action and the
execution of the action
8
ENT
Press to complete the input-output setup when using a one-digit
number instead of two digits. For example, to enter input 5, you
can press either 05 or 5, ENT.
Press to enter the options in a setup menu.
9
BREAKAWAY Button
Press to exit a menu (see
Section 7
10
DEFAULT SETUP Button
Press to recall the default setup (see
Section 6.4.5
11
OUTPUTS/INPUTS
LCD Display
Displays the outputs (upper row) switched to the selected inputs
(lower row), (see
Section 6.1
Displays user interface messages and menus.
12
IR Receiver
Infrared remote control sensor
13
IR LED
Lights yellow when receiving commands from the IR remote
control transmitter
14
TAKE Button
Press to confirm actions (see
Section 6.3.2
15
MENU Button
Press once to enable the ALL, OFF, STO and RCL buttons (see
Section 7
Press again to enter the configuration menu (see
Section 7.2
When in a Menu, press to cycle through the menu items.
16
LOCK Button
Press and hold for approximately 2 sec to lock/unlock the front
panel buttons (see
Section 6.5
17
Power Supply
Supplies power to the device.
18
19
POWER LED
Lights green when power supply is active and the device is
powered on.
20
ERROR LED
Lights red when an error is detected. Briefly lights red
immediately following a power disruption (e.g., cable
disconnection, power off, and so on).