![background image](http://html.mh-extra.com/html/kramer/vs-3232dn/vs-3232dn_user-manual_2001320076.webp)
VS-3232DN - Using the Input / Output Cards
69
Figure 16: Accessing Audio over VGA
10.12.1 VGAA-OUT4-F32 / VGAA-IN4-F32 Configuration
The
VGAA-IN4-F32
configuration table appears as follows:
VGAA-IN4-F32 Input Card
Parameter
Description
Default
Resolution Detect
Auto, User Defined, Auto Adjust, (see note below table).
Auto
Phase Mode
Auto, User Defined, Auto Adjust, (see note below table).
Auto
Brightness
(0–63)
32
Contrast
(0–63)
32
Phase adjustment
(0–63)
Note
: This adjustment is only valid when Phase Mode Is set to User
Defined mode.
As detected
Reset Input
Re-power
—P
ower cycles the port.
Factory—Performs a factory reset of the port to default values.
-
Hor-Total Pixels
Set the value for total horizontal pictures.
(1–7000)
As detected
Horizontal-Start
Set the value for horizontal start.
(1–600)
As detected
Horizontal-Active
Set the value for horizontal active pixels.
(1–4000)
As detected
Vertical-Start
Set the value for vertical start.
(1–255)
As detected