![background image](http://html1.mh-extra.com/html/kramer/vs-162avm/vs-162avm_user-manual_2001818014.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing and Operating a Single VS-162AVM
10
6
Installing and Operating a Single VS-162AVM
To install the
VS-162AVM
, connect the following
1
•
Video input and output cables
to the rear panel, as
required:
•
Audio input and output cables
•
Control interface cables between switcher units, or PC (or other
controller), as section
9
describes
•
Set the DIP-switches, as section
8.1
describes
•
Power cord
•
Set the system variables using the MENU function, as section
11
describes
By default, the
VS-162AVM
is setup for use as a single machine. This
means that it is:
•
A 16x16 composite video switcher and a 16x16 balanced stereo
audio switcher are set to function by default, in the audio-follow-
video mode
•
Switched during the vertical interval of the external reference
In particular, be sure that the DIP-switches are set as
Figure 2
illustrates
(see section
8.1
for further details):
Figure 2: Default DIP-Switch Setup on a Single Machine
To operate a single machine, see
Table 3
.
1 Switch OFF the power on each device before connecting it to your unit
Summary of Contents for VS-162AVM
Page 7: ...Getting Started 3 ...