![background image](http://html1.mh-extra.com/html/kramer/vs-162avm/vs-162avm_user-manual_2001818027.webp)
Operating Your VS-162AVM
23
23
10 Operating Your VS-162AVM
Operate your
VS-162AVM
via:
•
The front panel buttons (as this section describes)
•
RS-232 or RS-485 serial commands transmitted by a touch screen
system, PC, or other serial controller (see section
14
)
•
Kramer
RC-IR3
Infrared Remote Control Transmitter
•
Contact closure switches connected to the keyboard extension
•
An external IR receiver unit for controlling the machine via an IR
remote controller
10.1 Startup Display
After switching on the power, the
MATRIX
and
STATUS
1
displays show the
following screen:
Figure 14: Default Startup Status Display Sequence
After a few seconds the MATRIX display shows the current OUT and IN
connections. The contents of the STATUS display depend on the current
switcher setup. To choose what to indicate on the status display, see section
11.6
.
10.2 Preview Display
The preview display with its headphone output lets you see and hear the
contents of any video or audio input that is currently connected to output 16.
Output 16 is also available for regular output with the same specs as all the
other outputs. The regular video output and the preview display switch in
parallel as well as the audio output.
The Preview/16 output is manually controlled (it does not switch
automatically) and switches the same way as all the other outputs. This
includes remote operations.
1 Version 1.5 is shown in the Status Display as an example; text in the matrix display may vary (according to machine
settings)
Summary of Contents for VS-162AVM
Page 7: ...Getting Started 3 ...