![background image](http://html1.mh-extra.com/html/kramer/vs-162avm/vs-162avm_user-manual_2001818011.webp)
Your Audio-Video Router
7
7
Table 1: Front Panel Features
#
Feature
Function
1 IR Receiver LED
The red LED illuminates when receiving signals from the Kramer infrared
remote control transmitter
2 IR Receiver
Receives signals from the Kramer infrared remote control transmitter
3
Preview Monitor
Displays the video routed to output 16
4
LC
D
C
ON
TR
OL
MENU
Button
Press once to display the last LCD settings (brightness, contrast, saturation,
and sharpness), each additional press scrolls through the menu items
+ Button
Increases the selected setting
– Button
Decreases the last setting
POWER
Button
Turns the LCD display on and off
5
VOLUME
Knob
Adjusts the audio level of the headphones
6
PHONES
¼” Connector Jack for connecting the headphones to audio 16 output
7
ALL
Button
Pressing
ALL
followed by an
INPUT
button, connects that input to all outputs
8
VIDEO
Button
When selected
1
9
actions relate to video independently from audio
OFF
Button
An
OFF
-
OUT
combination disconnects that output from the inputs; an
OFF
-
ALL
combination disconnects all the outputs
10
AUDIO
Button
When selected
2
11
actions relate to audio independently from video
STO
Button
Stores the current setting in the non-volatile memory
12
AFV
Button
When selected actions relate to video and audio channels. Audio channels
follow the video channels, and the AFV button is illuminated
13
RCL
Button
Recalls a setup from the non-volatile memory
14 LCD
MATRIX
Display
3
Displays the selected input(s) switched to the output(s) (above or below the
corresponding
OUTPUT
label) and user interface messages
15 LCD
STATUS
Display
3
Displays the matrix status
16
OUT
Buttons
Select the output to which the input is switched (1 to 15)
Preview/16 connects the input to the preview monitor
17
IN
Buttons
Select the input to switch to the output (1 to 16)
18
MENU
Button
Recall and navigate the menu points for matrix setting
19
TAKE
Button
Used to confirm and complete setup and switching
Table 2: Rear Panel Features
#
Feature
Function
20
IN
BNC Connectors
Connect to the video sources
21
OUT
BNC Connectors
Connect to the video acceptors
22
IN
Terminal Blocks
Connect to the audio sources
23
OUT
Terminal Blocks
Connect to the audio acceptors
24
SYN
C
IN
BNC Connector
Connect to the external video sync source
25
LOOP
BNC Connector
Connect to the
SYNC
IN
connector on the next unit
26
TERM
Button
Press to terminate at 75
Ω
or release for looping (push in to
terminate the sync line. Release when the sync line extends to
another unit)
27
EXT.
(extension)
KEYS
Terminal
Block Connectors
Connect to an external keyboard (remote unit)
1 The VIDEO button is illuminated when the video breakaway mode is selected
2 The AUDIO button is illuminated when the audio breakaway mode is selected
3 In sections
10
and
11
, the word “Displays” refers to the LCD MATRIX and STATUS displays
Summary of Contents for VS-162AVM
Page 7: ...Getting Started 3 ...