![background image](http://html1.mh-extra.com/html/kramer/vs-162avm/vs-162avm_user-manual_2001818018.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Understanding Addressing and System Modes
14
8
Understanding Addressing and System Modes
To control multiple machines, the
VS-162AVM
uses a system of addressing
that includes hardware DIP-switches and menu commands. The DIP-
switches are used to set the MACHINE#, and menu commands are used to
set the MACHINE ADDRESS #. Note the following:
•
A standalone machine is always set to MACHINE# 1
•
When configuring multiple
VS-162AVM
units or
a matrix of
VS-162AVM
machines, the array is viewed as one large unit and
the DIP-switches of all machines are set to the same MACHINE#.
However, each machine is set to a unique MACHINE ADDRESS
# with a menu command on its display panel according to the
addressing rule shown in
8.1
•
When configuring a mix of different model machines, each group
of models receives a different MACHINE# and each machine is
set to a unique MACHINE ADDRESS # (see section
8.2
).
8.1 Setting the DIP-Switches
Configure the unit by setting the 8 DIP-switches as defined in
Figure 8
and
Table 4
:
1 2
ON
3 4 5 6 7 8
}
RS-232 NULL-MODEM
MACHINE #
SYSTEM MODE SLAVE MODE
RS-485 TERMINATION
Figure 8: Rear Panel DIP-switches
Summary of Contents for VS-162AVM
Page 7: ...Getting Started 3 ...