![background image](http://html1.mh-extra.com/html/kramer/vs-121hca/vs-121hca_user-manual_2002277017.webp)
KRAMER: SIMPLE CREATIVE TECHNOLOGY
Operating the VS-121HCA
14
machine. This distance can be extended to up to 60 meters when used with
three extension cables
1
Before using the external IR receiver, be sure to arrange for your Kramer
dealer to insert an internal IR connection cable
16F
2
, which is required so that
the REMOTE IR 3.5mm connector can be used. Connect the external IR
receiver to the REMOTE IR 3.5mm connector.
To operate your device using the Infrared remote controller, see the User
Manual packed with the remote controller.
7.5.1
27B
Adjusting the Input Volume
Use the
RC-IR2
remote controller to adjust the input volume on any of the
individual input channels. The setting is saved in non-volatile memory and
remains even after the unit is turned OFF and ON.
To adjust the volume:
1. On the remote controller, press the VOL+ or VOL- button to choose an
increase or decrease in the volume.
2. Then press the number key of the desired input to perform the change and
hold the button to continue the change.
7.6
17B
Setting the DIP-switches
This section describes the
VS-121HCA
DIP-switch settings that configure
RS-485 bus termination, the
VS-121HCA
machine number, and DIP-switch
7 that lets you operate the
VS-121HCA
in tandem with the
VS-121HC
.
Figure 8
illustrates the factory default DIP-switch positions.
1
2
3
4
5
6
7
8
OFF
ON
In-tandem operation
Figure 8: Product DIP-switches
1 P/N: 95-0103050
2 P/N: 505-70434010-S