![background image](http://html1.mh-extra.com/html/kramer/vs-121hca/vs-121hca_user-manual_2002277010.webp)
Connecting the VS-121HCA
7
6
Connecting the VS-121HCA
To connect devices to the
VS-121HCA
, as illustrated in the example in
Figure 2
, perform the following
1
1. Connect the following input sources (up to 24 input devices can be
connected
:
2
One S/PDIF input source (for example, a DVD) to the IN 7 RCA
connector
):
One S/PDIF input source (for example, a DAT player) to the IN 10
RCA connector
One analog audio input source (for example, a stereo audio player)
to the IN 4 terminal block connector
One analog audio input source (for example, a stereo audio player)
to the IN 10 terminal block connector
2. Connect the outputs to acceptors (1 or 2 output devices can be connected
1
):
One S/PDIF output acceptor (for example, a DAT recorder) to the
S/PDIF OUT RCA connector
One analog output acceptor (for example, a stereo audio recorder) to
the analog audio OUT terminal block connector
3. Connect the power cord (not shown in
Figure 2
).
4. Optionally, you can connect a PC or controller to the RS-232, RS-485, or
Ethernet ports (see section
7
) and/or an IR remote transmitter (see section
7.5
).
1 Switch OFF the power on each device before connecting it to your VS-121HCA. After connecting your VS-121HCA,
switch on its power and then switch on the power on each device
2 Not all input or output ports need to be connected