Operating the VS-121HCA
13
6. Select Use the following IP address, and fill in the details as shown in
Figure 7
.
7. Click
OK
.
Figure 7: Internet Protocol (TCP/IP) Properties Window
7.4.2 Connecting the ETHERNET Port via a Network Hub (Straight-Through
Cable)
You can connect the Ethernet port of the
VS-121HCA
to the Ethernet port
on a network hub or network router, via a straight-through cable with RJ-45
connectors.
7.4.3 Configuring the Ethernet Port
After connecting the Ethernet port, you must install and configure the port.
For detailed instructions on how to install and configure your Ethernet port,
see the “Ethernet Configuration (FC-11) guide.pdf” on our Web site:
http://www.kramerelectronics.com
7.5
Operating via the Infrared Remote Controller
You can use the
RC-IR2
IR transmitter to control the machine via the
built-in IR receiver on the front panel or, instead, via an optional external IR
receiver
1
1 P/N: 95-0104050
. The external IR receiver can be located 15 meters away from the