![background image](http://html1.mh-extra.com/html/kramer/vp-773a/vp-773a_user-manual_2001270117.webp)
VP-773A - The VP-773A RS-232 Communication Protocol
111
111
Network settings commands
Network settings commands require admin authorization
Command
Syntax
Response
Address
NTMC?
Set subnet
mask
NET-MASK
SUBNET_MASK
NTMSK
NET-MASK
SUBNET_MASK
RESULT
Read subnet
mask
NET-MASK?
NTMSK?
NET-MASK
SUBNET_MASK
Set gateway
address
NET-GATE
GATEWAY_
ADDRESS
NTGT
NET-GATE
GATEWAY_ADDRESS RESULT
Read subnet
mask
NET-GATE?
NTGT?
NET-GATE
GATEWAY_ADDRESS
Set DHCP
mode
NET-DHCP
DHCP_MODE
NTDH
NET-DHCP
DHCP_MODE
RESULT
Read subnet
mask
NET-DHCP?
NTDH?
NET-DHCP
DHCP_MODE
DHCP_MODE =
0 (factory default)
– Don't use DHCP (Use IP set by factory or IP set command).
1
– Try to use DHCP, if unavailable use IP as above.
2
– Try to use DHCP, if unavailable use AUTO-IP as described here:
http://support.microsoft.com/kb/q307287/ .
After setting DHCP_MODE to 1 or 2 you need to reset the device
Change
protocol
Ethernet port
ETH-PORT
PROTOCOL
,
PORT
ETH-PORT
PROTOCOL ,PORT
RESULT
Read protocol
Ethernet port
ETH-PORT?
PROTOCOL
ETH-PORT
PROTOCOL
,
PORT
PROTOCOL
= TCP / UDP
(transport layer protocol)
PORT
=
Ethernet port to enter protocol 3000 commands.
1-65535 = User defined port
0 - reset port to factory default (50000 for UDP, 5000 for TCP)
Load new
peripheral
firmware P
Step 1:
LDFW
SIZE
Response 1:
READY
or
LDFW
SIZE
ERR###
Step 2: If
ready
was received, send
FIRMWARE_DATA
P
Response 2:
LDFW
SIZE
RESULT
Load new video
core firmware
Step 1:
LDFWS
SIZE
Response 1:
READY
or
LDFWS
SIZE
ERR###
Step 2: If
ready
was received, send
FIRMWARE_DATA
P
Response 2:
LDFWS
SIZE
RESULT
Load new
audio/graphic
memory file
Step 1:
LDMFS
SIZE
Response 1:
READY
or
LDMFS
SIZE
ERR###
Step 2: If
ready
was received, send
FIRMWARE_DATA
P
Response 2:
LDMFS
SIZE
RESULT