32
VP-773A - The OSD Menu
6.7
The Scale Menu
Figure 24: Scale Menu
Setting
Function
Aspect
Ratio
Set (see
Section
6.7.1
) to:
Follow Input
– Display on the output with pixel-to-pixel mapping of the input. If
the input resolution ≤ output resolution, display with a blank border.
If the input resolution > output resolution, Follow Input is denied and the aspect
ratio automatically changes to Follow Output
M
Follow Output
– Display as a full picture at the selected output resolution. If
the input resolution < output resolution, scale up the picture. If the input
resolution > output resolution, scale down the picture
M
Best Fit
– the best possible compromise between the input and the output
aspect ratios, showing the largest possible picture with no distortion
M
Letterbox
– to compress the top and bottom edges of the input signal, but fill
the width of the screen
M
Applies to the Single Window display mode only
Overscan
Set the overscan (per window) to Off, 5% or 10%
M
/
P
Output
Set the:
Output Resolution
– to Native, 640x480@60, 640x480@75, 800x600@50,
800x600@60, 800x600@75, 1024x768@50, 1024x768@60, 1024x768@75,
1280x768@50, 1280x768@60, 1280x800@60, 1280x1024@50,
1280x1024@60, 1280x1024@75, 1360x768@60, 1366x768@50,
1366x768@60, 1400x1050@50, 1400x1050@60, 1600x900@60,
1600x1200@50, 1600x1200@60, 1680x1050@60, 1920x1200@60, 480i60,
480p60, 576i50, 576p50, 720p50, 720p59.94, 720p60, 1080p23.976, 1080p24,
1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94, 1080p60, 2k50 or 2k60
E
Note that any change in the output resolution may cancel the
zoom setting and window customization.
Master Connection
– to HDMI1, HDMI2 or HDBT to determine the machine’s
behavior (see
Section
6.7.2
)
E
If the native resolution is not supported by the selected Master Connection, the
system searches for the best supported resolution. If the search fails (for example, if
the master connection is disconnected or EDID is unreadable), the resolution will
default to XGA.
