VP-773A - Controlling the VP-773A
51
51
6. Select
Use the following IP Address
for static IP addressing and fill in the
details as shown in
Figure 33
.
For TCP/IPv4 you can use any IP address in the range 192.168.1.1 to
192.168.1.255 (excluding 192.168.1.39) that is provided by your IT
department.
Figure 33: Internet Protocol Properties Window
7. Click
OK
.
8. Click
Close
.
8.3.3.2
Connecting the ETHERNET Port via a Network Hub or Switch
You can connect the Ethernet port of the
VP-773A
to the Ethernet port on a
network hub or network router, via a straight-through cable with RJ-45 connectors.
8.3.3.3
Ethernet Port Configuration and Control
Use the Kramer K-UPLOAD software to configure the
VP-773A
and the Web pages
to control it via the Ethernet.
The latest version of K-UPLOAD and installation instructions can be
downloaded from the Kramer Web site at
www.kramerav.com/downloads/
