![background image](http://html1.mh-extra.com/html/kramer/vp-773a/vp-773a_user-manual_2001270098.webp)
92
VP-773A - Port Tunneling
To setup and activate port tunneling on the
VP-773A
:
1. Set the dedicated port tunneling Ethernet connection port type and port
number through which the
VP-773A
will be passing RS-232 signals.
By default, the dedicated port settings are TCP, 5050.
To change these settings
see the “Port Tunneling Configuration” in the table
in
Section
13.4
or via the embedded Web pages (see
Section
9.7
).
2. Set the HDBT UART command (the table in
Section
13.4
).
By default, the settings are 9600,8,N,1
3. Make sure that the
VP-773A
is connected to Ethernet.
The
VP-773A
is now ready to tunnel RS-232 signals via Ethernet port tunneling.