Connecting the VP-747T
11
7 Connecting the VP-747T
To connect the
VP-747T
to up to four
VP-747
machines, as the example in
Figure 7
illustrates, do the following
15F
1
:
1. Connect the “TO VP-747” mini XLR connector of the
VP-747T
(by
one-to-one connection) to the
VP-747
, as follows:
MACH. # 1 to the mini XLR connector of the
VP-747
which will be
recognized as machine # 1
MACH. # 2
to the mini XLR connector of the
VP-747
which will be
recognized as machine # 2
2. Connect the “TO VP-747” 3-pin
terminal block ports of the
VP-747T
(by
wired connection) to the
VP-747
, as follows (see section
U
7.2
U
):
MACH. # 3
to the mini XLR connector of the
VP-747
which will be
recognized as machine # 3
MACH. # 4
to the mini XLR connector of the
VP-747
which will be
recognized as machine # 4
3. Set the “T-Bar Optimization” mode in the “Transition” menu of the
VP-747
to On.
4. Connect the 12V DC power adapter to the power socket and connect the
adapter to the mains electricity (not illustrated in
U
Figure 7
U
).
If you want to control several units simultaneously, press the MACHINE #
button until the letter A is selected in the 7-segment LED display (A=ALL).
One of the units must be connected to port #1 for units to be controlled
simultaneously.
1 Switch OFF the power on each device before connecting it to your VP-747T. After connecting your VP-747T, switch on its
power and then switch on the power on each device