VP-437N - Controlling the VP-437N
11
11
6
Controlling the VP-437N
The
VP-437N
can be controlled via:
•
The front panel buttons (see
Section 6.1
•
The OSD menu (see
)
Section 6.2
•
The Ethernet (see
)
Section 6.3
•
RS-232 serial commands transmitted by a touch screen system, PC, or
other serial controller (see
)
Section 6.4
•
The infrared remote control transmitter (see
)
Section 6.5
6.1
Controlling via the Front Panel Buttons
)
The
VP-437N
includes the following front panel buttons:
•
Input selector buttons for selecting the required input: CV, YC,
COMPONENT (1 and 2), VGA or HDMI (1 and 2)
•
BLANK, MUTE and FREEZE buttons
•
MENU, ENTER, and up, down, left and right arrow buttons
•
RESET TO XGA/720p and PANEL LOCK buttons
6.1.1
The Auto Adjust (Auto Tune) Feature
The auto adjust feature (which applies only to the VGA input) automatically centers
the image on the screen when pressing the ENTER front panel button or the OK
button on the remote control transmitter (when not within the OSD menu).
You can also implement this feature every time the input is switched to VGA or
when the input resolution changes, via the FINE TUNE menu (see
Section 6.2.2
6.2
Using the OSD Menu
).
The control buttons let you control the
VP-437N
via the OSD menu. Press the:
•
MENU button to enter the menu (the default timeout is set to 10 seconds)
•
ENTER button to accept changes and to change the menu settings