Kramer VP-435, User Manual

Page: 8 / 18

VP-435 - Overview 5
Figure 1: VP-435 Component / UXGA HDMI Scaler
# Feature Function
1 IR Receiver Receives signals from the remote control transmitter
2 INPUT Selector Button Press to select the UXGA input, the COMP input, or the
HDMI input
3
UXGA, COMP, HDMI INPUT
LEDs
Each LED lights when its input is selected
4 Selector Button Press to select the resolution: 480p, 576p, 720p, 1080i or
1080p
5
480p, 576p, 720p, 1080i or
1080p RES
LEDs
Each LED lights when its resolution is selected
6 MENU Button
Displays the OSD menu (see Section 5.2 )
7 ENTER Button Press to accept changes and change the SETUP
parameters (see
Section 5.2)
8 - Button Press to move down the menu list
9 + Button Press to move up the menu list values
10 HDMI OUT Connector Connects to the HDMI acceptor
11 HDMI IN 3.5mm Mini Jack
Connector
Connects to the analog unbalanced stereo audio signal
The audio source is automatically detected and selected.
The default selection is the audio signal embedded in the
HDMI signal. If this is not present, then the machine uses
the audio from the analog input
12 HDMI IN Connector Connects to the HDMI source
13 UXGA IN 3.5mm Mini Jack
Connector
Connects to the analog unbalanced stereo audio signal
source
14
UXGA IN 15-pin HD Connector
Connects to the UXGA source
15 COMP IN Pr, Pb, Y RCA
Connectors
Connects to the component video source
For component video, connect all three connectors: Y,
Cb, Cr (also known as YUV)
16 COMP IN R, L RCA Connectors Connect to the left and right analog unbalanced stereo
audio source (of the COMP source)
17
REMOTE Terminal Block
Connects to a contact closure switch (see Section
4.1
)
18 12V DC Connector +12V DC connector for powering the unit