![background image](http://html.mh-extra.com/html/kramer/vp-427x2/vp-427x2_user-manual_2002005009.webp)
Kramer Electronics Ltd.
VP-427X2
– Connecting VP-427X2
7
Connecting VP-427X2
Always switch off the power to each device before connecting it to your
VP-427X2
. After
connecting your
VP-427X2
, connect its power and then switch on the power to each device.
Figure 3: Connecting to the VP-427X2
To connect
VP-427X2
as illustrated in the example in
1. Connect an HDBT transmitter (for example, Kramer
TP-780Txr
) to the INPUT HDBT 1
RJ-45 port
on the front panel. The transmitter is connected to a Blu-ray player.
2. Connect an HDBT transmitter (for example, Kramer
TP-780Txr
) to the INPUT HDBT 2
RJ-45 port
on the front panel. The transmitter is connected to a PC.
3. Connect an
HDMI source (for example, Kramer
VIA GO
) to the HDMI INPUT connector
.
4. Connect the HDMI OUT connector
to an
HDMI Acceptor (for example, a display).
5. Connect the REMOTE pins
to contact closure switches (for example, an occupancy
Connecting the Remote Control Switches
).
6. Connect the AUDIO OUT 5-pin terminal block connector
to a balanced stereo audio
acceptor (for example, Kramer
Tavor 5-O
active speakers).
7. Connect an IR sensor to the IR IN 3.5mm mini jack
. In this example, point the
Blu-ray remote controller to the sensor to control the Blu-ray that is connected to
TP-780Txr
via HDBT.
8. Connect a control system (for example, a laptop) to the ETHERNET RJ-45 port
.
9. Connect a control system to the RS-232 3-pin terminal block connector
.
Connecting to VP-427X2 via RS-232
).
10. Connect the power adapter to
VP-427X2
and plug the adaptor to the mains electricity
12
13
14
18
16
17
4
10
15