![background image](http://html.mh-extra.com/html/kramer/vp-427x2/vp-427x2_user-manual_2002005018.webp)
Kramer Electronics Ltd.
VP-427X2
– Operating and Controlling VP-427X2
16
3. Set freeze mode according to the information in the following table:
Menu Item
Function
Mute
Freeze the image and mute the audio output.
Only Mute
Mute the audio output.
Only Freeze
Freeze the image.
When pressed, FREEZE button functions as defined.
Setting Ethernet Parameters
VP-427X2
enables defining the Ethernet parameters via the MENU front panel buttons.
To set the Ethernet parameters:
1. On the front panel press
MENU
. The menu appears.
2. Click
Advanced
and define the Ethernet parameters according to the information in the
following table:
Menu Item
Function
IP Mode
Select Static IP (default) or DHCP.
Static IP Address
Enter to change the IP address.
Subnet Mask
Enter to change the subnet mask.
Default Gateway
Enter to change the default gateway.
TCP Port
Enter TCP port # (5000, by default).
UDP Port
Enter UDP port # (50000, by default).
IP
View the current IP address.
MAC ADDRESS
View the MAC address.
Network parameters are defined.
Defining CEC
VP-427X2
can be configured to automatically send CEC on/off commands to the connected
display (default) or to pass CEC commands from the connected source to the connected
display.
To set the CEC (Consumer Electronic Control) functionality:
1. On the front panel press
MENU
. The menu appears.
2. Click
Advanced
and select
Output CEC Bypass
.
3. Select:
▪
Off
– Automatically send CEC commands to shut down the output display after a
timeout period when no input signal is found and to power up the display when the
input returns.
▪
On
– Pass CEC commands from the source to the display.
CEC functionality is defined.