Kramer VP-413XL, User Manual

Page: 7 / 15

Your Scaler
5
Figure 2 and Table 3 define the output resolution options:
Table 3: VP-413xl Output Resolution Options
Illuminated LEDS Output Resolution
VGA VGA
SVGA SVGA
XGA XGA
WXGA WXGA
VGA and SVGA SXGA
SVGA and XGA UXGA
XGA and WXGA WUXGA
Figure 2: Setting the Output
Resolution of the VP-413xl
4.1.1
Sync
Enable/Disable Output Function
You can enable or disable the sync output signals when no source is
connected, to enable the display/projector to enter its sleep mode, and turn off
when no sync is detected.
To toggle between the sync output enable/disable state while no input is
connected, do the following:
1. Press and hold the input selection button and connect the power supply cable.
2. Hold the button until one of the input LEDs flashes for a short time (this takes
about 12 sec).
To identify the current status of the unit, disconnect and reconnect the power
cable to start up the unit:
If both INPUT LEDs flash for a short time, the sync output signals are
disabled
If both INPUT LEDs remain ON during unit startup, the sync output
signals are enabled