![background image](http://html.mh-extra.com/html/kramer/via-connect-plus/via-connect-plus_user-manual_2000838042.webp)
Kramer Electronics Ltd.
VIA Connect
– For Web Administrator: Configuring Settings – Gateway Management Pages
40
To view and search the system activity logs:
1. Click
Reports
>
Webadmin Activity Log
/
Gateway Activity Log
on the navigation
pane.
The Webadmin Activity Log / Gateway Activity Log page appears.
2. Select the Start Date and the End Date to define the date range of log entries to be
displayed.
3. Enter a search term and press the Enter key.
The filtered search results appear in the table at the bottom of the page.
Click
Export to PDF
or
Export to CSV
to save a file of the log table on your computer.
Updating Firmware
VIA Connect
enables you to update your
VIA Connect
firmware.
If you are running a firmware version lower than 2.3, please install the 2.3.0418.960 release
before updating your device to the latest release. In this case, use ONLY the .zip file available
for download from our technical support web page:
www. kramerav. com/support/downloads.
The upload process and then the unit reboot may take a few minutes.
To update your VIA Connect firmware:
1. Click
Utility
>
Update Firmware
on the navigation pane.
The Update Firmware page appears.
2. When using an update file saved on your computer:
a. Click
Browse File
.
A file browser appears.
b. Select the relevant firmware update file.
c. Click
Upload
.
The new firmware is uploaded to the unit and the firmware is updated.
When using an update file on the website, and you have an internet connection:
a. Click
Check for Update
.
A message appears with information about an available update.
Check for Updates is also available on the System Information Page.
b. If an update is available, confirm the download.
The new firmware is downloaded to your computer.
c. Click
Browse File
.
A file browser appears.
d. Select the relevant firmware update file.