Kramer TP-578H, User Manual

Page: 21 / 41

TP-578H - Protocol 3000 17
17
10 Protocol 3000
The TP-578H can be operated using serial commands from a PC, remote
controller or touch screen using the Kramer Protocol 3000.
This section describes the:

Kramer Protocol 3000 syntax (see Section
10.1
)

Kramer Protocol 3000 commands (see Section
10.2
)
10.1 Kramer Protocol 3000 Syntax
10.1.1 Host Message Format
Start Address (optional) Body Delimiter
# device_id @ Message
CR
10.1.1.1 Simple Command
Command string with only one command without addressing:
Start Body Delimiter
#
Command SP
Parameter_1,Parameter_2,…
CR
10.1.1.2 Command String
Formal syntax with command concatenation and addressing:
Start Address Body Delimiter
# device_id @ Command_1
Parameter1_1,Parameter1_2,…|
Command_2
Parameter2_1,Parameter2_2,…|
Command_3
Parameter3_1,Parameter3_2,… |…
CR
10.1.2 Device Message Format
Start Address (optional) Body delimiter
~ device_id @ Message
CR LF
10.1.2.1 Device Long Response
Echoing command:
Start Address (optional) Body Delimiter
~
device_id @
Command SP [
Param1 ,Param2 …
] result CR LF
CR = Carriage return (ASCII 13 = 0x0D)
LF = Line feed (ASCII 10 = 0x0A)
SP = Space (ASCII 32 = 0x20)