background image

 

16 

TP-578H - Default EDID 

 

  IT underscan............. Supported 
  Basic audio.............. Supported 
  YCbCr 4:4:4.............. Not supported 
  YCbCr 4:2:2.............. Not supported 
  Native formats........... 1 
  Detailed timing #1....... 1920x1080p at 60Hz (16:10) 
    Modeline............... "1920x1080" 148.500 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync 
  Detailed timing #2....... 1920x1080i at 60Hz (16:10) 
    Modeline............... "1920x1080" 74.250 1920 2008 2052 2200 1080 1084 1094 1124 inthsync +vsync 
  Detailed timing #3....... 1280x720p at 60Hz (16:10) 
    Modeline............... "1280x720" 74.250 1280 1390 1430 1650 720 725 730 750 +hsync +vsync 
  Detailed timing #4....... 720x480p at 60Hz (16:10) 
    Modeline............... "720x480" 27.000 720 736 798 858 480 489 495 525 -hsync -vsync 
 
CE audio data (formats supported) 
  LPCM    2-channel, 16/20/24 bit depths at 32/44/48 kHz 
 
CE video identifiers (VICs) - timing/formats supported 
    1920 x 1080p at  60Hz - HDTV (16:9, 1:1) 
    1920 x 1080i at  60Hz - HDTV (16:9, 1:1) 
    1280 x  720p at  60Hz - HDTV (16:9, 1:1) [Native] 
     720 x  480p at  60Hz - EDTV (16:9, 32:27) 
     720 x  480p at  60Hz - EDTV (4:3, 8:9) 
     720 x  480i at  60Hz - Doublescan (16:9, 32:27) 
     720 x  576i at  50Hz - Doublescan (16:9, 64:45) 
     640 x  480p at  60Hz - Default (4:3, 1:1) 
    NB: NTSC refresh rate = (Hz*1000)/1001 
 
CE vendor specific data (VSDB) 
  IEEE registration number. 0x000C03 
  CEC physical address..... 1.0.0.0 
  Maximum TMDS clock....... 165MHz 
 
CE speaker allocation data 
  Channel configuration.... 2.0 
  Front left/right......... Yes 
  Front LFE................ No 
  Front center............. No 
  Rear left/right.......... No 
  Rear center.............. No 
  Front left/right center.. No 
  Rear left/right center... No 
  Rear LFE................. No 
 
Report information 
  Date generated........... 23-Nov-14 
  Software revision........ 2.70.0.989 
  Data source.............. File 
  Operating system......... 6.1.7601.2.Service Pack 1 
 
Raw data 
  00,FF,FF,FF,FF,FF,FF,00,2D,B2,00,12,01,01,01,01,FF,15,01,03,80,34,20,78,E2,B3,25,AC,51,30,B4,26, 
  10,50,54,FF,FF,80,81,8F,81,99,A9,40,61,59,45,59,31,59,71,4A,81,40,01,1D,00,72,51,D0,1E,20,6E,28, 
  55,00,07,44,21,00,00,1E,00,00,00,FF,00,35,30,35,2D,37,30,39,39,39,30,31,30,30,00,00,00,FC,00,54, 
  50,2D,35,37,38,48,00,00,00,00,00,00,00,00,00,FD,00,38,4C,1E,53,11,00,0A,20,20,20,20,20,20,01,C5, 
  02,03,1B,C1,23,09,07,07,48,10,05,84,03,02,07,16,01,65,03,0C,00,10,00,83,01,00,00,02,3A,80,18,71, 
  38,2D,40,58,2C,45,00,07,44,21,00,00,1E,01,1D,80,18,71,1C,16,20,58,2C,25,00,07,44,21,00,00,9E,01, 
  1D,00,72,51,D0,1E,20,6E,28,55,00,07,44,21,00,00,1E,8C,0A,D0,8A,20,E0,2D,10,10,3E,96,00,07,44,21, 
  00,00,18,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,77 

 

 

Summary of Contents for TP-578H










































Reviews: