8
TP-578H - Connecting the TP-578H
5
Connecting the TP-578H
Always disconnect/switch off the power to all devices before
connecting them to your
TP-578H
. After connecting your
TP-578H
,
connect its power and then reconnect/switch on the power to the other
devices.
Figure 3: Connecting the TP-578H DGKat to HDMI Receiver
To connect the TP-578H as illustrated in the example in
Figure 3
:
1. Connect the DGKat Out RJ-45 connector on the
WP-577VH
to the DGKat In
RJ-45 connector on the
TP-578H
using STP cable (see
Section
3.1
).
2. Connect the HDMI Output on the
TP-578H
to the HDMI acceptor, (for
example, a projector).
3. Connect the RS-232 3-way terminal block on the
TP-578H
to the RS-232
controlled device, (for example, a projector).
i
Summary of Contents for TP-578H
Page 1: ...KRAMER ELECTRONICS LTD USER MANUAL MODEL TP 578H DGKat to HDMI Receiver P N 2900 300189 Rev 1...
Page 2: ......
Page 3: ......
Page 40: ......
