Kramer TP-578H, User Manual

Page: 34 / 41

30 TP-578H - Protocol 3000
Command - RESET Command Type - System-mandatory
Command Name Permission Transparency
Set:
RESET
Administrator Public
Get: - - -
Description Syntax
Set: Reset device
# RESET
␍
Get: - -
Response
~nn@ RESET
␠
OK
␍␊
Parameters
Response Triggers
Notes
To avoid locking the port due to a USB bug in Windows, disconnect USB connections immediately after
running this command. If the port was locked, disconnect and reconnect the cable to reopen the port.
Command - SIGNAL Command Type - System
Command Name Permission Transparency
Set: - - -
Get SIGNAL? End User Public
Description Syntax
Set: - -
Get: Get input signal lock status
# SIGNAL?
␠
inp_id
␍
Response
~ nn@ SIGNAL
␠
inp_id,status
␍␊
Parameters
inp_id - input number
status - lock status according to signal validation, (see Section
10.2.5
)
Response Triggers
After execution, a response is sent to the com port from which the Get was received
Response is sent after every change in input signal status ON to OFF, or OFF to ON
Notes