![background image](http://html1.mh-extra.com/html/kramer/sg-6006/sg-6006_user-manual_2001035013.webp)
Technical Specifications
11
rear panel port on the Master
SG-6006
unit, as illustrated in
Figure 3
Female DB9 (From PC)
PIN 4 Connected to PIN 6
PINS 8, 7, 1 Connected together
If a Shielded cable is used, connect the shield to PIN 5
PIN 5 Connected to PIN 5 (Ground)
PIN 3 Connected to PIN 2
PIN 2 Connected to PIN 3
Male DB9
Figure 3: Connecting a PC without using a Null-modem Adapter
8
Technical Specifications
Table 3
includes the technical specifications.
Table 3: Technical Specifications
1
INPUTS:
of the SG-6006
1 REF (genlock), looping on BNC connectors, 1Vpp/75
Ω on BNC connectors with a
termination switch
OUTPUTS:
8 composite video on BNC connectors, globally configurable: black burst
0.3Vpp/75
Ω (sync) or 1Vpp/75Ω max (color bar);
4 SDI SMPTE-259M, ITU-BT.601 on BNC connectors, 0.8Vpp/75
Ω;
1 stereo balanced analog audio on 2 XLR connectors, 12dBu max;
1 unbalanced stereo analog audio on 2 RCA connectors, 6dBu max;
2 AES/EBU digital audio on XLR connectors, 0dBFS max;
2 AES 75
Ω
(AES-3id) digital audio on BNC connectors, 0dBFS max
VIDEO STANDARDS:
PAL, NTSC
COLOR BAR:
8 selectable patterns
STABILITY:
1ppm
S/N RATIO:
VIDEO: >73dB (black burst)
AUDIO: 89dB
DIGITIZATION:
VIDEO: 10 bits, 27MHz
AUDIO: 20 bits, 48kHz
CONTROLS:
VIDEO: black burst or test signal configuration
AUDIO: frequency out: 10Hz to 20kHz; audio analog range: 31dBu; audio digital
range: 31dBFS; each channel may be set to silent;
Control via front panel (OSD) and RS-232;
Buttons for genlock, panel lock, input termination
POWER SOURCE:
100-240VAC, 50/60Hz, 10VA
DIMENSIONS:
48.3cm x 17.8cm x 4.4cm (19in x 7in x 1.8in) W, D, H rack mountable
WEIGHT:
2.5kg (5.5lbs) approx.
ACCESSORIES:
Power cord, rack “ears” and Null-modem adapter
1 Specifications are subject to change without notice