![background image](http://html.mh-extra.com/html/kramer/rc-62/rc-62_user-manual_2000900007.webp)
Installing the Room Controller
5
Table 2: RC-62 Front Panel Features
#
Feature
Function
1
“DISPLAY” and
“SOURCE” Labels
RC-62
- "DISPLAY" and “SOURCE” are printed on the panel
RC-62P
- backlit plastic cap to affix your own labels (see Figure 10)
RC-62L
- an LCD version on a blue background that displays up to 8
characters at once (programmed via the USB port) and includes rolling text
2
DISPLAY Buttons These 2 configurable backlit buttons can set up any supported command
1
3
SOURCE Buttons These 4 configurable backlit buttons can set up any supported command
1
Version for Europe
Version for the USA
Figure 2: RC-62 Room Controller Rear Panel
Table 3: RC-62 Rear Panel Features
#
Feature
Function
1
FIRMWARE UPGRADE
Switch
For technical support use only
2
Grounding Screw
Connect to grounding wire (optional)
3
K-NET TERM Switch
For line termination
4
PROGRAM (USB)
Connector
Connect to a computer for unit configuration
5
IR IN Receiver
Receives IR remote commands
6
RELAYS Connections
Connect to room items (such as lighting, screen settings, blinds, and so on)
7
IR Connections
Control a machine via an IR Emitter
8
RS-232 Connections
Connect to the RS-232 connector on the A/V equipment or a PC or other Serial
Controller
9
K-NET 2 Connections
10
K-NET 1 (K-NET)
Connections
On K-NET 1 (K-NET) and K-NET 2, PIN GND is for the Ground
connection
2
; PIN B (-) and PIN A (+) are for RS-485, and PIN +12V is for
powering the unit
11
FACTORY RESET
Button
Press to revert to the default settings, including all the configured buttons
1 By the system integrator only
2 The ground connection is sometimes connected to the shield of the RS-485 cable (in most applications, it is not connected)