![background image](http://html.mh-extra.com/html/kramer/rc-62/rc-62_user-manual_2000900011.webp)
Installing the Room Controller
9
Table 5: RC-63D Front Panel Features
#
Feature
Function
1
SOURCE Buttons These 4 configurable backlit buttons can set up any supported command
1
2
“DISPLAY” and
“SOURCE” Labels
RC-63D
- "DISPLAY" and “SOURCE” are printed on the panel
RC-63DP
- backlit plastic cap to affix your own labels (see Figure 10)
RC-63DL
- an LCD version on a blue background that displays up to 8 characters
at once (programmed via the USB port) and includes rolling text
3
DISPLAY Buttons These 2 configurable backlit buttons can set up any supported command
1
4
VOLUME LED
Lights red, indicating maximum volume
5
VOLUME LEDs
Lights green, indicating volume level
6
VOLUME Knob
Rotate clockwise to increase the level
Version for Europe
Version for the USA
Figure 4: RC-63D Room Controller Rear Panel
Table 6: RC-63D Rear Panel Features
#
Feature
Function
1
FIRMWARE UPGRADE Switch For technical support use only
2
Grounding Screw
Connect to grounding wire
3
K-NET TERM Switch
For line termination
4
PROGRAM (USB) Connector
Connect to a computer for unit configuration
5
IR IN Receiver
Receives IR remote commands
6
RELAY Connections
Connect to room items (such as lighting, screen settings, and so on)
7
IR Connections
Control a machine via an IR Emitter
8
RS-232 Connections
Connect to the RS-232 connector on the A/V equipment or a PC or
other Serial Controller
9
K-NET 2 Connections
10 K-NET 1 Connections
On K-NET 1 and K-NET 2, PIN GND is for the Ground
connection
2
; PIN B (-) and PIN A (+) are for RS-485, and PIN
+12V is for powering the unit
11 FACTORY RESET Button
Press to revert to the default settings, including all the configured
buttons
1 By the system integrator only
2 The ground connection is sometimes connected to the shield of the RS-485 cable (in most applications, it is not connected)