![background image](http://html.mh-extra.com/html/kramer/rc-62/rc-62_user-manual_2000900015.webp)
Using Your Room Controller
13
5.1 Operating the Room Controller
In the following example
1
that is illustrated in Figure 8, the room controller is
labeled with specific functions and each button is programmed
2
to perform
several tasks
3
as defined in Table 8.
Table 8: The Commands Configuration
The Label
The Macro Sequence
ON
Power up the projector
Power up the DVD player
Roll down the projector screen
1 minute delay [for the projector to heat
up]
The projector selects the DVD input
OFF
Power down the projector
Stop the DVD player
Power down the DVD player
Stop the VCR
Power down the VCR
Roll up the projector screen
DVD
Stop the video player
The projector selects the DVD input
Play the DVD
VCR
Stop the DVD
The projector selects the VCR input
Play the VCR
ROOM
Figure 8: RC-63DL Labels Setup
VOLUME
Use the VOLUME knob to adjust the
audio level
5.2 Using the Macro Buttons
Pressing any button initiates a macro sequence
4
, during which the button blinks
(as programmed by the system integrator).
1 This is only one example among numerous possibilities, each button can be configured as required. In this example, two
buttons are not assigned
2 By the technical installer
3 A macro sequence, including several commands per button, carried out one after the other
4 The macro sequence can be carried out instantly or can take a while, depending on the delay times included in the sequence