![background image](http://html1.mh-extra.com/html/kramer/kw-14r-il/kw-14r-il_user-manual_2001933025.webp)
KW-14T-IL/KW-14R-IL - Frequently Asked Questions
21
8
Frequently Asked Questions
Q: Why did my registration fail?
A:
Ensure that both the paired units are the only Kramer devices currently powered
on.
A:
Ensure that the transmitter and receiver are no closer than 2m (6ft) to each
other.
A:
Keep the number of walls and obstructions between the transmitter and receiver
to a minimum.
A:
Reduce the distance between the transmitter and receiver.
Q: Why is the OSD not displayed?
A:
Ensure that the resolution on the display is set to 1080p.
A:
Ensure that the link is not in standby mode, that is, there is a valid video link and
a valid source is connected.
Q: Why is there no signal on my display?
A:
Ensure that the receiver is powered on.
A:
Ensure that the display is powered on.
A:
Ensure that the receiver is properly connected to the display.
A:
Ensure that the display is set to display video from the correct source, (HDMI 1,
HDMI 2, and so on).
A:
Disconnect then reconnect the HDMI cable between the receiver and the
display.
A:
Replace the HDMI cable.
A:
Ensure that the video resolution is supported by the display.