![background image](http://html1.mh-extra.com/html/kramer/kw-14r-il/kw-14r-il_user-manual_2001933017.webp)
KW-14T-IL/KW-14R-IL - Connecting the KW-14T-IL and KW-14R-IL
13
When the registration process is complete, the message and progress bar
disappear from the display. The Link and Video LEDs light solid.
5. Repeat steps 1 to 4 to register up to three transmitters to a receiver.
5.2.3
Registering Multiple Receivers
Note
: Registration cannot be performed if the transmitter is currently broadcasting a
signal.
To register an additional receiver with a transmitter
:
1. Power down all receivers except the one you want to register.
2. Perform steps 2 through 4 of the registration procedures, (see
Section 5.2.1
or
Section 5.2.2
) depending on the method of registration).
3. When registration is complete, power-on the other receivers.
5.3
Standby Mode
The
KW-14R-IL
automatically enters a sleep mode when any of the following
occurs:
•
No input is connected
•
No valid input (resolution) is connected
•
When the link is lost or not established
When entering sleep mode, the OSD is displayed for three minutes and the video
output is muted. When the valid video link is restored the signal is automatically
transmitted.