18
KW-14T-IL/KW-14R-IL - Mounting the KW-14T-IL and the KW-14R-IL
7
Mounting the KW-14T-IL and the KW-14R-IL
The
KW-14T-IL
and the
KW-14R-IL
can be mounted to a wall or furniture and
should not be more than 30m (100ft) apart.
7.1
Mounting Locations Best Practices
For single transmitter installations:
•
Ensure that the receiver(s) is within 30m (100ft) of the transmitter, (the
distance is reduced if transmission is not line-of-sight).
•
Maintain a distance of at least 2m (6.5ft) between the transmitter and the
receiver(s). Be mindful of units located beyond walls in adjacent rooms.
For multiple transmitter installations:
•
Up to four transmitters can operate in the same room or environment
depending on local regulations. When installing more than four transmitters
in the same environment, the next group of units must be separated to
prevent interference. Ensure that there is at least a 45m (150 feet) radius
around the outermost units in each group.
•
Maintain a distance of at least 2m (6.5ft) between individual transmitters
and receivers. Be mindful of units located beyond walls in adjacent rooms.
7.2
Mounting the Transmitter and Receiver
To mount the transmitter or receiver to a wall or furniture
:
1. Print and cut out the mounting templates for the devices. Templates can be
downloaded from
Note
: The diagrams shown below in
are not to scale and you
should download the scale drawings from our Web site.
2. Tape the template in the required location.
3. Drill pilot holes into the wall or furniture through each of the mounting-hole
