3
SPECIFICATIONS
OPERATIONS
The owner and/or operator is responsible for providing maintenance, maintaining all decals or warning labels and
while in use, maintaining the unit in good work order. If the owner and/or operator is not fluent in English, the product
warnings and instructions shall be read and discussed with the operator in the operator’s native language by the
purchaser/owner or his designee. The jack shall be inspected per the instruction manual prior to use.
It is the owner and/or operators responsibility to study all WARNINGS on the product label and the operating and
maintenance instructions prior to operation of this unit. The owner/operator shall retain the product instructions for
future reference.
To use the jack, the necessary, individual and personal protective clothing (preferably safety shoes insensitive to oil
materials, protective gloves, etc.) must be made available.
If the generated loads are higher than the values allow, these loads have to be reduced with the help of additional
people.
The user must work in accordance with the instruction manual.
The user must be able to monitor the jack and its load during use.
It is not allowed to work under the uplifted load until it is secured with suitable means (jack stands).
Raising the vehicle:
1. Make sure the jack and vehicle are on a hand level surface.
2. Always set the vehicle parking brake and block the wheels.
3. Consult the vehicle owner’s manual to ascertain the location of jack points and position the jack beneath the
prescribed lift point.
4. Turn the release valve clockwise to the closed position.
DO NOT OVERTIGHTEN!
5. Step on foot pedal to raise saddle until it makes contact with the vehicle. Check to see that the saddle is centered
and will contact the load lifting point firmly. WARNING! Foot pedal it's not apt to lift the load but only to quick lift
the saddle.
6. Continue to pump the jack with handle to lift the vehicle to the desired height.
7. Place jack stands beneath the vehicle at locations recommended by the vehicle manufacturer. Do not get under the
vehicle without jack stands. Jacks are not designed to maintain heavy loads for long periods of time.
8. Turn release valve
SLOWLY
counterclockwise to lower the vehicle onto the ground.
Lowering the vehicle:
1. Turn the release valve clockwise to the closed position.
2. Pump the handle to lift vehicle off of jack stands.
3. Remove the jack stands. Do not get under or let anyone else under the vehicle while lowering.
4. Turn the release valve
SLOWLY
counterclockwise to lower the vehicle onto the ground.
min. 145 mm
max. 500 mm
Quick lift
678 mm
340mm
180 mm
3
T
37.2 kg
