manualshive.com logo in svg

Kracht VC 0,025, Operating Instructions Manual

Share
Download
Kracht VC 0,025 Operating Instructions Manual Download Page 9

 DANGER

Hazard caused by falling and tipping loads

During transport, accidents can occur due to the size and weight of the
device.
Compliance with applicable industrial safety requirements is mandatory.
Wear suitable protective clothing.
Use only suitable means of conveyance and lifting tackle with sufficient
load-bearing capacity.
Attach lifting tackle only to suitable points.
Attach the lifting tackle in such a manner that it cannot slip.
Secure the unit so that toppling over and falling down is impossible.
Always avoid jerks, impacts and strong vibrations during transportation.
Never walk under suspended loads.
Never work under suspended loads.

 CAUTION

Hazard caused by hot surfaces

The user is to take measures against unintended contact at temperatures
above 60°C.

 CAUTION

Hazard caused by hot surfaces

At operating temperature above 48 °C the device must be allowed to cool
down first. Danger of scalding.

Gear type flow meter VC 0,025 ... VC 16

BVC0002EN-D0025420002_01     2010-07-05

9

Summary of Contents for VC 0,025



































































Reviews:

No comments

Brands by name

Popular brands

Load more brands