2 Safety
2.1 Safety instructions and symbols
The safety notices in these operating instructions are marked with caution
symbols.
Non-compliance can lead to hazards for people and the device.
In addition, the safety instructions are marked with signal words. They have
the meanings as explained below:
Caution:
Identification of a low risk hazard, which could lead to minor or
medium bodily injury if not avoided.
Warning:
Identification of a potential medium risk hazard, which would lead
to death or severe bodily injury if not avoided.
Danger:
Identification of an immediate hazard, which would result in death
or severe bodily injury if not avoided.
Notice:
Flagging of notices to prevent property damage.
Flagging of special user tips and other especially useful or important infor-
mation.
2.2 Staff qualification and training
The staff designated to install, operate and maintenance the device must be
properly qualified. This can be through training or specific instruction. Staff
must be familiar with the contents of this operating manual.
2.3 General safety instructions
The operational safety of the device delivered is only guaranteed when it is
used for the intended purpose (see chapter "
The limit values given must never be exceeded (see chapter "
").
National regulations concerning accident prevention and health and safety
at work must be observed, as well as internal regulations laid down by the
operator, even if these are not specifically mentioned in this manual.
The operator must ensure that this operating manual is accessible to the
staff responsible at all times.
Gear type flow meter VC 0,025 ... VC 16
BVC0002EN-D0025420002_01 2010-07-05
7
