kozy heat MINNETONKA 55345-RF, Installation And Operation Manual

Page: 35 / 67

#MTK-50A LOG SET INSTALLATION
ATTENTION: If converting to LP (propane) gas, do so now before installing log set. Follow instructions included with conversion kit.
NOTE: Log numbers are located on the bottom of each log. Refer to following instructions and illustrations for proper placement.
CAUTION: Do not place logs directly over burner port holes.
Improper log placement may affect flame appearance and cause excessive soot to build up on logs and glass.
STEP 2
PAGE 32
STEP 1
#1A
Position base log #1A onto the burner, setting the backside of the log against the flange at the back.
Pull the log forward approximately 1/2” (13 mm).
DO NOT ALLOW LOGS TO COVER THE BURNER PORT HOLES.
#3
#2
Position base logs #2, #3 & #6 onto burner as shown above.
DO NOT ALLOW LOGS TO COVER THE BURNER PORT HOLES.
#6