kozy heat KOZY POWER VENT, Manual, Page: 1 / 46

Kozy Power Vent Approved Fireplaces:
#CLW-72
HUSSONG MANUFACTURING CO., INC.
READ ALL THESE STEPS
BEFORE STARTING INSTALLATION.
LEAVE THESE INSTRUCTIONS WITH THE
APPLIANCE.
This kit must be installed by a qualified installer,
service agency, or gas supplier at the time of
the heater installation. These instructions must
be used in conjunction with the installation and
operation manual provided with the appliance.
Please read the appliance owner’s manual
completely before performing any procedures in
these instructions.
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
KOZY POWER VENT
#KPV
English and French installation manuals are available through your
local dealer. Visit our website www.kozyheat.com .
Les manuels d’installation en français et en anglais sont disponibles
chez votre détaillant local. Visitez www.kozyheat.com.
Hussong Manufacturing Co., Inc.
P.O. Box 577, 204 Industrial Park Drive
Lakefield, MN 56150-0577, USA
Kozy Power Vent #KPV
Rev. 1, 4/19
IMPORTANT: Failure to read and follow these
instructions may create a possible hazard and
will void the fireplace warranty.
1.0 INTRODUCTION .......................................................................3
1.1 Introduction ......................................................................................... 3
1.2 Components and Service Parts List ............................................. 3
1.3 Installation ............................................................................................ 3
2.0 VENTING ...................................................................................4
2.1 Venting Requirements ..................................................................... 4
2.2 Horizontal Terminations .................................................................. 5
2.3 Draft Bypass Adjustment ............................................................... 7
3.0 FRAMING AND CLEARANCES ................................................8
3.1 Framing and Clearances .................................................................. 8
3.2 Clearances to Combustibles .......................................................... 9
3.3 Rooftop Termination ......................................................................... 9
3.4 Termination Cap Clearances ........................................................10
3.5 Installing Vent Cap ...........................................................................11
4.0 ELECTRICAL INFORMATION ................................................15
4.1 Wiring to the Appliance .................................................................15
5.0 MAINTENANCE .....................................................................19
5.1 Replace Fan Assembly/Vacuum Switch ...................................19
6.0 TROUBLESHOOTING .............................................................21