#C39-50B Log Set Installation
SECTION 8
FIREPLACE SETUP
#CAR-39
R.11 February 2022
44
HUSSONG MFG. CO., INC.
KOZY HEAT FIREPLACES
8.4 #C39-50B Log Set Installation
CAUTION: Do not place logs directly over burner port holes. Improper
log placement may affect flame appearance and cause excessive soot
to build upon the logs and glass.
•
If converting to propane, complete the conversion before
installing the log set. Follow the conversion instructions included
with the kit.
•
Log numbers are located on the bottom of each log. Refer to the
following instructions and illustrations for proper log placement.
1. Position the ember panel in front of the burner.
2. Align the slots in the bottom of log C39-1B with the mounting
pins on the back log plate / burner bracket required for your
installation. Push log down to seat.
3. Align the holes in the bottom of base logs C39-2B, C39-3B, C39-
4B, C39-5B, C39-6B and C39-13B with the mounting pins on the
burner. Push logs down on to pins to seat.
4. Align logs C39-7B, C39-8B, and C39-9B with the notches on the
base logs.
5. Align log C39-11B with the notch on log C39-8B.
6. Align logs C39-10B and C39-12B with the notches on the
ember panel.
7. Distribute rockwool embers onto the logs and burner using a
stiff bristle brush.
FIGURE 8.3
Installed Log Set
FIGURE 8.2
Base Logs
