Kozi Tradition A1108, Owner'S Manual

Page: 6 / 40

Page 6
9. The heater must be turned off and allowed to cool before cleaning. Make
sure there are no hot ashes or embers present. Use a brush and scoop to
clean. Only use vacuum cleaners specifically designed for use with hot
ashes. Place all ashes in a sealed metal container with a tight, non
flammable fitting lid.
10. Store all pellet fuel in a sealed metal container at a safe distance (at least
36 inches / 1 meter) away from the heater. DO NOT place the fuel
within the installation clearances of the stove or within the space needed
for ash removal and start up.
11. This heater is POWER VENTED. The vent pipes have positive pressure
during operation. It is IMPERATIVE that all joints in the venting system
be SEALED to prevent any leakage of exhaust gases inside the house.
All joints must be sealed using high temperature silicone sealer (RTV).
Aluminum tape is not an adequate sealant.
12. Use of outside combustion air is highly recommended and is mandatory
in mobile home installations. Connect the air intake of the heater to the
exterior of the building with a noncombustible metal pipe with a
minimum diameter of 2 inches (50 mm) (Use APR Part No AK100). Use
of plastic pipe is not permitted.
13. This appliance is wired and grounded according to the CSA C22.1 code
for Canada and the NFPA 70 code for the USA. Also, this heater meets
the fuel burning appliance installation codes NFPA 211 in the USA and
CSA B365 in Canada.
14. Do NOT operate the heater with the door open. Make sure the door and
any other opening in the stove are closed tightly during operation.
Inspect the gaskets of the door and other openings periodically to make
sure they are in good condition.
15. Replace broken or defective components only with parts provided by the
manufacturer. See WWW.KOZISTOVES.COM or contact your local
dealer to find out how to purchase replacement parts.
16. Follow this manual carefully for proper installation. If you are uncertain,
call your dealer. Most dealers have qualified and trained installers. We
highly recommend the use of their services.