Kowa K9L39F5BE, Service Manual

Page: 24 / 51

GG-09004 Edition 4.0
- 23 -
②－３ Replacing the menu switch board
１ Disconnect the connector from the menu switch board.
２ Remove four screws and then the menu switch board.
３ Fit the new menu switch board and connect the connector.
2
②－４ Replacing the battery
１ Disconnect the connector from the menu switch board.
２ Remove four screws and then the menu switch board.
３ Disconnect the battery.
４ Remove the seal which is fixing the battery and then the battery.
５ Fit the new battery and connect the connector.
６ Fit the menu switch board and connect the connector.
2 3
②－５ Replacing the lamp volume knob and the flash light intensity selection switch
１ Remove the panel cover.
２ Remove the caps of the lamp volume knob and the flash light intensity-adjusting knob with a
(-) driver.
３ Loosen screws to remove two knobs with the knobs being held in your hand to avoid their
turning..
４ Disconnect the connectors from the switch panel board.
５ Remove two screws and then the fitting plate.
６ Remove the lamp volume knob or the flash light intensity selection switch with a box wrench.
７ Fit a new lamp volume knob or the flash light intensity selection switch.
８ Fit the fitting plate and connect the connectors.
2 3 4 5
6 7