Kowa K9L39F5BE, Service Manual

Page: 15 / 51

GG-09004 Edition 4.0
- 14 -
3-2
Removing the power supply
*Always turn off the power switch and pull the plug from the socket.
１ Remove the outer cover beforehand.
２ Remove two screws underneath the chin rest and then the cover.
３ Disconnect two connectors of the chin rest.
４ Tighten the optical head base fixing screw.
５ Fit the optical head base fixing screw.
６ Place the base (thickness: 50mm) in a location away from the power switch.
７ Remove four screws of the optical head base.
８ Lay the optical head base in a location away from the power switch, with the base being
raised with your hand.
2 2 3 4
5 6 7 8
3-3
Removing the optical head base
*Always turn off the power switch and pull the plug from the socket.
１ Remove the power supply beforehand.
２ Remove two screws and the stoppers.
３ Loosen the optical head base fixing screw.
４ Place the optical head base horizontally.
2 2 3 4