GB-097B_f
15
8:38 THU 14.04.2020
8:38 THU 14.04.2020
SERVICE/CONFIGURATION
SERVICE/CONFIGURATION
SERVICE / CONFIGURATION
PARAMETERS PREVIEW:
Preview of input and output signals of the heat
pump.
First start-up
With the start-up of the heat pump or after the restoration of the factory settings, select
MENU’s language. Heat pump is ready to work properly
only after selection of this parameter.
CONFIGURATION
* Changes in the configuration menu are possible after entering an access code. When prompted
for an access code, set recquired code by turn the navigation dial to the left and confirm the code
by pressing the dial. If you want to retract from the code request screen, hold the navigation dial
or wait until automatic return to main function screen.
Code : 987
● CYLINDER: Change of hysteresis setting DHW.
● CIRCULATION: turn on or off the circuit.
● FAN: change of the minimum ventilator operating temperature.
● FROST PROTECTION (only when the circulation is active in the system): yes >
turn on the protection of hot water installation from frost.
● ADDITIONAL HEAT SOURCE: yes > providing an additional heat source.
● DEVICE’S NO: device’s number on the mains.
Exit any menu item by pressing ′End′ or by pressing and holding the navigation dial.
When not operated by the user, main function screen will appear after about 3 min.
SERVICE
Diagnostic options available only for authorised service
