GB-097B_f
11
[1] - ventilator
[2] - signalling of program implementation
[3] - signalling of compressor work
[4] - electric heater
[5] - external heat source /coil
[6] - temperature of upper cylinder
[7] - temperature of bottom cylinder
[8] - temperature of inlet air (displayed only while
ventilator is working)
[9] - set hot water temperature
MAIN SCREEN
9:37 TUE 2.01.2018
9:37 TUE 2.01.2018
17
17
°°
41
41
°°
12.7°
12.7°
Tzad
Tzad
50°
50°
8
4
6
2
1
9
3
5
7
Signalling of set work program:
Maintaining efficiency according to set daily/weekly schedule
Disinfection
Heat pump blocked by an external signal
FN
FN function work indication
Device’s warning indication
Device’s error indication
Indication of switching on fan
gear 1
gear 2
Indication of switching on compressor
Indication of switching on heater
Indication of switching on additional heat source
The navigation dial switches function screens:
-
MAIN SCREEN: informs about main heat pump parameters (→ MAIN SCREEN),
-
SETTINGS: allows to adjust parameters to user’s preferences,
-
SERVICE / CONFIGURATION: allows to set the hot water heating system (available
to specialized services) and preview of input and output signals of the device.
Access to individual functions is enabled after selecting suitable function screen and
pressing navigation dial.
The appearance of an error (s) or warnings of the device is signaled on the main ( /
) function screen, after pressing the knob, a list of errors and warnings is available.
