Koryo KFP 1000, User Manual

Page: 12 / 18

12
CeNTrIFUGAL JUICer
(Extract juice from apples, pineapples and carrots)
steps
1. Follow the first 4 steps of kneading operation to fit the spindle &
processor bowl.
2. Lock extractor mesh into the juicer extractor by turning mesh in
anticlockwise direction. Then place the same in the center of the
bowl and on the spindle and press firmly (Fig.3)
3. By holding the feeder tube of the juicer lid, lock the lid by rotating
clockwise aligning feeder tube with the handle of the processor.
4. Plug in the processor.
5. Run the processor at the maximum speed “1”
6. Feed cut pieces of the apple or any other non-citrus fruit through
the feeder tube.
7. Use the food pusher to push and press the fruit pieces.
8. The juice will be collected in the processor bowl.
9. The pulp will be accumulate in the juice extractor mesh & cutter
assembly
10. If the juice extractor mesh & cutter assembly gets clogged during
operation, turn the processor OFF and remove the pulp from it.
11. To remove the juice, stop the processor, remove the juicer lid and
juice extractor mesh & cutter assembly.
12. Turn anticlockwise to unlock the processor bowl and lift.
13. Store juice in a container.
Notes:
1. Always operate the juicer at speed “1”
2. Pulp must be removed before it starts over spilling. Empty the
pulp regularly.
3. When ever the juicing operation is stopped, ensure to empty the
pulp before restarting.
4. To clean juice extractor mesh & cutter assembly, turn the juicer
mesh in clockwise direction & lift.
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
Fig.6