Kortho 814532, Manual

Page: 36 / 65

TROUBLESHOOTING
kortho
Hot Quick Coder-D H215 AE
Rev.: 10
7-2
7.3 Error 003
Occurs only at system boot.
7.3.1 -20°C
Fig. 7.4 ERROR 003, ‐ 20°C.
The temperature sensor circuit is short circuited or the PT1000 sensor is defect.
7.3.2 300°C
Fig. 7.5 ERROR 003, 300°C.
The temperature sensor circuit is open circuited, the PT1000 sensor is not connected or defect and if an
HQC ‐ AT heating element/coding unit is connected to the control box.
7.4 Error 004
Occurs only if the SET ALARM parameter is set.
Fig. 7.6 ERROR 004.
The temperature alarm is activated.
A too high or too low print temperature deviation from the SET TEMP parameter value (±5°C, ±10°C or
±15°C) has occured.
The actual print temperature is displayed, here represented as ###°C.
ERROR 003 -20…C
ERROR 003 300…C
ERROR 004 ###…C