Kortho 814532, Manual

Page: 35 / 65

H215 AE
Rev.: 10
kortho
Hot Quick Coder-D
7-1
7 TROUBLESHOOTING
7.1 Error 001
Fig. 7.1 ERROR 001.
A too high or too low print temperature is detected.
The print temperature must be in between ‐ 10 to 200°C.
The actual temperature is displayed, here represented as ###°C
7.2 Error 002
Occurs only in the stop or run mode.
7.2.1 -20°C
Fig. 7.2 ERROR 002, ‐ 20°C.
The temperature sensor circuit is short circuited or the PT1000 sensor is defect.
7.2.2 300°C
Fig. 7.3 ERROR 002, 300°C.
The temperature sensor circuit is open circuited or the PT1000 sensor is not connected or defect.
ERROR 001 ###…C
ERROR 002 -20…C
ERROR 002 300…C