Utility
80
that the
Key
is set to
C
, and the third note of the scale (E) is 50 cents flat. If you transpose up by 2 semitones, and play
an E, the result will be an F# 50 cents flat—still the third note of the scale. For this application, it’s also best to set the
Convert Position
to
Post-MIDI
; for more information, see “Convert Position” on page 77.
Preferences
Auto Power-Off
[Disabled, 4 Hours]
By default, to conserve energy, the wavestate will automatically turn off after about four hours have elapsed without use
of the front panel, keyboard, or MIDI input. You can disable this feature, if desired.
When the power turns off, any un-saved edits or settings will be lost. Make sure that you save important settings
before this occurs.
Display Brightness
[0…100]
This controls the brightness of the OLED display.
SST Hold Time
[0 ms…60 sec]
This controls the duration of Smooth Sound Transitions. It sets how long reverbs, delays, and note releases continue to
ring out after a new sound has been selected. The timer starts after all notes from the previous sound are no longer
being held down, and the sustain pedal is released.
Memory Protect
[Off, On]
When this is
On
, Write functionality is disabled.
Set List A1 at Power On
[Off, On]
Off:
At power-up, the last-used sound will be selected.
On:
At power-up, Set List Slot A1 will be selected.
System Stats
This page provides diagnostic information for the system.
CPU Usage
[0.00…100.00%]
This shows the percentage of available processing power being used for voices and effects.
Temperature
[°C]
This shows the CPU’s temperature.
