TRITON Training Guide
61
8. Now, from the
Track Select
popup menu (below the song name), select
Track02: Bass
.
9. Press the
Track Edit Page menu button
, then press
Shift / Erase Note
. Set the
From Measure:
to
001
, and the
To Measure:
to
016
.
10. Now, in the
Note Range
field of this page, press
Shift Note
and set the value to
+003
, then press
OK
.
11. Use the
5
5
VALUE
key to move to the next track, and follow
the previous step
. Continue to use the
5
5
VALUE
key to move to the rest of the tracks you've recorded on, and repeat
step 10
for each track.
You've just
transposed the note range
of
all tracks
except Track 1 Drums.
Time to review…
Let's review what's just been done to get to this point:
1. You created a song using the Template Songs and a Preset drum pattern, then recorded additional
tracks and set Play Loops for the tracks.
2. Next, you learned about the Solo / Mute functions.
3. Then you created two new songs, copied the original song to both new locations, and renamed all three
songs INTRO, VERSE and CHORUS. Three identical songs with different names…then you made
changes to each song - muting, transposing, and set a new Play Loop for the Bass track in the verse.
Now to create the Cue List:
1. Press the
MENU
key, then press
P1: Cue List
. You'll see that
Step 01
in the list already contains what
you need:
S000: INTRO
. Press to check the
Load FX checkbox
. Now, when the Cue list plays back, the
Effects from song
S000: INTRO
will load.
2. Press
End
, just below the first step in the Cue List, then press
Insert
. Song
S001: VERSE
is inserted in
the Cue list as
Step 02
. In
Step 02
's
Repeat
field, press
01
, and set the amount of times Step 02 repeats
to
02
.
3. Press to highlight the
Current Step 02
in the lower -right corner of the display, and press the
5
VALUE
key to change this to
03
. Press
Insert
, then press
Step 3
's
popup button in the
Song
field, and
select
S002: CHORUS
for
Step 03
.
