TRITON Training Guide
23
Take a "tour" of Program A034's arpeggio setup:
For now, we'll take you through the Arpeggio tab settings - the "performance edit" functions of an arpeggio
pattern in Program mode. This tab is great to go to when you want to edit the arpeggio pattern "on the fly", in
performance, or simply to try new patterns!
1. Press the
Arpeggio
tab at the bottom of the display. You'll see that
U135
is the arpeggio pattern
assigned to this Program (Pat:
>
U135 (A/B): Pentatonic).
2. Play and hold down
C2
(low-C on TRITON) to hear the pattern - note in the display that the
Octave
range has been set to
1
octave. Press the
Octave 4
radio button, then play and hold down
C2
again -
you'll hear the arpeggio pattern play through a 4-octave range, then continue to loop. The
Octave
setting
lets you specify the range of octaves for the pattern.
3. Press the
Octave 1
radio button again.
4. For this Program, the pattern
Reso
parameter is set to a
16
th
note.
Resolution
is the
interval
between
arpeggiated notes. Press the
popup button to the right of
Reso
, then press to select an
8
th
note from
the popup menu, and restrike the
C2
key to hear the interval change.
5. Re-select the
16
th
note from the
Reso
popup menu.
6. Press the
check
box to the left of
Latch
, play the
C2
key and take your hand off the keyboard. When
Latch
is checked, the pattern will continue when you take your hand off the keyboard - when un-
checked, the pattern will stop when you release the keyboard.
7. Press to un-check the
Latch
box.
