TRITON Training Guide
57
25. Make sure you're still on the
PlyLoop 1-8
tab, then press the
Track Play Loop checkbox
below
Bass
(2
nd
column). In the Bass (Track 2)
Loop Start Measure
field, set the value to
005
, and in the
Loop End
Measure
for this track, set the value to
008
, Press the
START/STOP
key, and the Track 1 and 2 will
Play Loop continually - each with different Loop Start and End measures! Later on, you can experiment
with the Play Loops - just set the
Loop Star
t and
End
measures to new values!
Note:
Make sure to press the LOCATE key after you've stopped playback - to reset the song to the
1
st
measure! No need to worry about it when you've just recorded though - the song resets to the first
measure automatically!
Now for something totally outrageous!!!
Ok, you've got a groove going…but wait, there's more! Let's rehearse, then record
Track 4
- the Guitar track
- and add a very funky and powerful surprise to the whole "picture":
26. Select
Track04
from the
Track Select
popup menu (see step 21). Play the keyboard to get an idea of
how FUNKY this guitar Program sounds, especially with that fine Delay Insert effect!
27. Now press the
ARPEGGIATOR ON/OFF
key to turn the Arpeggiator
ON
(lit).
28. Press
START/STOP
, and while the Drums and Bass Play Loop,
rehearse
your new Guitar track with the
Arpeggiator - in sync to the tempo!
Hold down
notes and chords to hear the arpeggio pattern play…
Is this COOL or WHAT?!?!?!?!?!?
Ready to record the Guitar track?
29. Press
START/STOP
, then press
LOCATE
to reset the song to the first measure.
30. Press
REC/WRITE
, then press
START/STOP
- after 2 bars of precount - you're recording! Record the
Guitar track for
at least 16 bars!
Remember, the
COMPARE
key is always there - waiting to "bail you
out" of a mistake…just stop recording, press COMPARE, and re-record the track until you like it! When
you're finished, press
START/STOP
, and
START/STOP
again - to hear your new tracks!
Note: The ARPEGGIATOR ON/OFF key turns off after you've recorded and during playback - that's
because the arpeggio pattern was recorded directly to the track! In fact, you can even OVERDUB
note data and GATE / VELOCITY knob movements on the arpeggiated track - or any other track that's
linked to the Arpeggiator (P7 - Arpeggiator Assign)!!!
