TRITON Training Guide
9
Loading the Factory Demos and Sounds
The following steps show you how to
restore the factory preload
demo songs, .PCG files and samples
.
Note:
The following procedure will rewrite the TRITON's internal memory. Make sure to backup your internal
data before proceeding!
1. Press to highlight
PRELOAD.SNG
:
2. Press the
Page menu button
Load
in the upper right corner of the display.
3. Press
Load selected
from the popup menu that appears, and a dialog box will appear in the display.
4.
Check
the boxes
Load PRELOAD.PCG too
and
Load PRELOAD.KSC too
. A radio button will indicate
Clear
, which means that the sample data you load will overwrite any previously loaded sample data-
from the beginning of the sample memory area. (Note: If you were to select
Append
, the new samples
would load into the unused portion of sample memory - for now, make sure
Clear
is selected).
5. Press
OK
. The factory data will load. When the
PRELOAD.KSC
file loads, the display will indicate
Where is a GOSPE000.KMP file
. At this point, the TRITON is looking for the sample data that the
PRELOAD.KSC script file is pointing to.
6. Eject the TNFD00P(US) disk from the drive and insert the
TNFD01P
disk, then press once -
anywhere
on the display
. The display will now recognize the new disk, and the
PRELOAD
folder will be
highlighted.
